Archive for the ‘Geothermal’ Category

Louisville Geothermal Contractor Guide: Installation Steps

Monday, April 30th, 2012

Are you interested in geothermal heating in Louisville? Are you considering using the natural heating and cooling energy of the Earth as a way to keep your home at a comfortable temperature?

If you are, you probably have a lot of questions, not the least of which have to do with the installation process. You may assume that it is complicated, but in most cases it is quite simple. Here is a simple summary of the steps involved in installing a geothermal system:

  1. The very first step, before any kind of installation can even be planned, is to evaluate the ground on which your home sits to be sure it can support a geothermal system. The area must be evaluated for soil and rock composition, availability of ground and surface water and availability of land.
  2. Once you have determined that your yard can handle a geothermal system, it is time to choose the type of system you need. This depends a lot on the evaluation from step 1, as well as some other factors. For one example, if you have very little land available, you may need to opt for a vertical loop configuration. For another, if you are fortunate enough to have a small body of water on your property, you can take advantage of a pond loop installation.
  3. Your Louisville geothermal contractor will dig and/or drill trenches for placement of the geothermal pipes. Try not to be nervous. This only takes a couple of days and they will disrupt your yard as little as possible.
  4. With the trenches prepared, pipes can be placed in accordance with the configuration you chose.
  5. Your contractor will fill the trenches back in to cover the pipes loosely. You may want to work with a landscaper to fully “re-assemble” your yard where the pipes were installed.
  6. Finally, the installation team will hook up the geothermal system to your home, make any necessary final adjustments, and you are good to go!

If you’re interested in geothermal heating for your home, consider contacting AccuTemp Heating & Air Conditioning today to discuss the installation process for your home.

Tags: , , , ,
Posted in Geothermal | Comments Off

Earth Day at the Louisville Zoo!

Friday, April 13th, 2012

Celebrate Earth Day with the Louisville Zoo! The entire month of April the Louisville Zoo will be hosting “Party for the Planet: A Month-long Celebration of the Earth”. Each week is jam packed with events for Zoo visitors of all ages. Admission will be only $2 on Earth Day, and the “Zoo will have in-depth displays on hand which highlight its conservation efforts throughout the year and the good work the Zoo’s Eco-Partners are doing across the globe”.

Louisville | Celebrate Earth Day | Accutemp Comfort

You can celebrate Earth Day at home by changing the air filters in your HVAC system. Changing your air filters once a month, or as needed, can increase the efficiency of your HVAC system. Scheduling a yearly maintenance visit will also help maintain performance levels. Overall, you should keep your heating and cooling system clean and free of debris in or near the vents and air ducts to ensure that there’s adequate airflow. Lack of airflow causes the system to work harder and less efficiently.

Tags: , , , , ,
Posted in Air Conditioning, Geothermal, Heating, Holiday | Comments Off

How Does Geothermal Energy Work? A Guide From Belknap

Friday, September 30th, 2011

Geothermal energy is energy extracted from the ground. This energy is in the ground in the first place because the ground absorbs the heat coming from the sun. This heat is always there, even when it is very cold outside. In fact, even when the ground appears to be frozen, you can actually extract plenty of heat to keep your Belknap home nice and toasty.

While this may at first appear to defy logic, the way that geothermal energy can be used for heating your home is actually quite simple. A geothermal heating system typically consists of an indoor air handler with a fan, a series of air ducts for the heated air to travel through and a closed loop of pipe that extends into the ground below and around your home.

This closed loop of pipe is actually where the geothermal heat is collected. Some type of liquid, usually water or antifreeze, will be continuously run through this pipe loop. As the liquid passes through the area of pipe that is below ground, it will absorb the heat from the surrounding soil. Once the liquid makes it back up to the air handler, the heat is able to disperse, heating the air in the chamber.

This heated air is then circulated throughout your house through the ducts by a fan. After it has released its heat into the air in your home, the liquid will cycle back into the ground to absorb more. This allows a geothermal heating system to provide you with a constant supply of warm air.

Unlike a furnace, which mixes in blasts of very hot air with periods of inactivity to try and keep your house at a constant temperature, a geothermal heat pump is able to provide a more consistent flow of air that is just the right temperature to keep your home comfortable. This means that these types of heat pumps are running just about all of the time as opposed to furnaces, but they are designed to work this way and the constant operation does not cause any excessive wear and tear.

Another great benefit of geothermal heat pumps is that they are able to keep your house cool in the summer as well. Just as the ground is warmer than the air in the winter, it is also cooler in the summer. That means that heat removed from your indoor air can be transferred to the ground in the same way that it was transferred in during the winter.

Tags: , , , ,
Posted in Geothermal | Comments Off