Posts Tagged ‘Anchorage’

Anchorage Heating Contractor Tip: The Beauty of Zone Heating

Monday, January 9th, 2012

While it might not technically be a necessity, there are a lot of reasons why you might want to look into having a zone heating system installed in your Anchorage home. Whether you’ve been using the same home heating system for a long time or are looking to have a new one installed, there’s never a bad time to have a zone heating system put in.

Most people think that the only thing that affects their home heating and cooling bills is the energy efficiency of their furnace or heat pump. However, that’s simply not always the case. Certainly, the more efficient your furnace or heat pump is, the lower your energy bills will be. But that doesn’t mean they’re as low as they could possibly be.

After all, if you don’t have a zone control system installed, you’re paying to heat your entire house every time you turn on the heat. Depending on the size of your house, that could mean you’re heating anywhere from two to 10 rooms or more that are unoccupied at the time. In fact, you could be paying to heat an entire empty wing of your home. And while you’ll pay less than you would if your heating system was less efficient, you’re still paying more than you need to.

With a zone control system, you can heat your home much more efficiently because you can control which areas of the house get the heat and which ones don’t. You can set multiple different temperatures for the different zones of your home, which allows you to keep the occupied areas warm while not forcing you to waste energy to heat unoccupied spaces.

Aside from the economic benefits of only heating the areas of your home that you need, zone control systems also can put an end to some of those contentious thermostat wars that go on in so many households. If the members of your household can never agree on what a comfortable temperature is, they can simply each set their own temperature for their own area of the house.

That way, everyone is happy and no one has to suffer uncomfortably. After all, you paid a lot for your state of the art home heating system. It’s only fitting that you should be able to get the most possible out of it.

Tags: , , , , ,
Posted in Heating | Comments Off

Why Fall Maintenance is Important for Your Heating System: A Tip from Russell

Monday, November 7th, 2011

When it comes to heating equipment maintenance and repairs, it does not pay to procrastinate. The longer you put off the maintenance, the higher the probability that your heating system will break down or your Russell heating and cooling contractor will be unable to make an emergency repair when you need it. That’s why fall is the best time of the year to have maintenance and repair procedures performed.

Consider this: when do most people call a heating and cooling contractor? The answer: when they need a repair. The call could come in the middle of the night when a furnace stops working or during a family party on a weekend – both times when it is hard to find someone to do the repair work. Has this happened to you?

You can avoid this aggravation and extra expense by scheduling fall maintenance for your heating system. Fall is often the “slow season” for heating and cooling professionals and many schedule their routine service and maintenance appointments during this time. Contractors expect to be busy during the peak winter months and prefer to spread out the workload as evenly as possible.

Most heating and cooling contractors offer service or maintenance agreements, which lock in at least one or two visits a year for furnace or air conditioner inspection. It is rare to find a contractor who will schedule a furnace inspection during the cold winter months. They know that time is usually saved for people with real emergencies. If you don’t have a service agreement with a contractor, you may want to consider signing up for one and avoid the risk of waiting in line for a furnace repair in the dead of winter.

During fall maintenance, your heating equipment will be switched on and inspected. That may sound routine but by running your heating system early, you may be spared the expense of repairing your system when it fails to operate or run smoothly during the cold months. If there is a problem, it is better to fix it ahead of time.

There is no guarantee that a furnace that is tuned up in the fall will last throughout the winter without needing service. But a little preventive maintenance ahead of time will save a lot of heartache – and dollars – when a real emergency comes up.

Tags: , , , , ,
Posted in Heating | Comments Off

Old Equipment You Really Shouldn’t Keep: A Tip from Fairdale

Monday, October 10th, 2011

When you move into an existing Fairdale home, there are many pieces of equipment that you may not want to keep. Some of them are just old and poor quality, while others cost you a lot of money and others still may be dangerous to you or your children. Before you settle into your space, make sure you have every one of your systems checked thoroughly for potential problems including inefficient heating, dangerous parts or environmentally unfriendly components.

Energy Cost

Number one on your list should be the cost of the energy needed to run your HVAC equipment. Furnaces and air conditioners in particular have become much more energy efficient in the last 10 years so older systems routinely cost much more money to operate than new ones. That doesn’t mean you should immediately rush out to replace your old furnace, but if it isn’t working properly or it’s costing you more money than you’d like, the cost benefit of a new system is often worth checking into.

Other things to check include your air quality system, your ventilation system and anything used to heat or cool food in the kitchen – all of which may be less efficient than you might like.

Ozone Depleting Refrigerants

Older appliances like air conditioners may still use ozone depleting refrigerants that are no longer considered safe (or in some cases legal) for home use. If this is the case, not only does your system probably have a very low SEER rating, it likely isn’t good for the environment or your own health. So, have your system replaced as soon as possible to avoid potentially negative side effects.

Dangerous Equipment

Finally, there are those pieces of equipment that are dangerous. If you find that your furnace has rust around the edges, your gas lines are kinked, or you have a dangerously out of date heat pump in your backyard, it may be time for some replacements. In general, these systems will last for years longer than they are considered safe and while you probably cannot buy a house without a working and safe furnace and air conditioner, you should still have them inspected carefully and replaced as soon as possible if you suspect problems.

Good HVAC equipment is hard to come by – if your home has it already, you’re in luck, but if you happen to move into a place with poor quality materials and equipment, have it replaced as soon as possible. Your health and wallet will both benefit greatly.

Tags: , , , , , ,
Posted in Air Conditioning, Heating | Comments Off

How Does Geothermal Energy Work? A Guide From Belknap

Friday, September 30th, 2011

Geothermal energy is energy extracted from the ground. This energy is in the ground in the first place because the ground absorbs the heat coming from the sun. This heat is always there, even when it is very cold outside. In fact, even when the ground appears to be frozen, you can actually extract plenty of heat to keep your Belknap home nice and toasty.

While this may at first appear to defy logic, the way that geothermal energy can be used for heating your home is actually quite simple. A geothermal heating system typically consists of an indoor air handler with a fan, a series of air ducts for the heated air to travel through and a closed loop of pipe that extends into the ground below and around your home.

This closed loop of pipe is actually where the geothermal heat is collected. Some type of liquid, usually water or antifreeze, will be continuously run through this pipe loop. As the liquid passes through the area of pipe that is below ground, it will absorb the heat from the surrounding soil. Once the liquid makes it back up to the air handler, the heat is able to disperse, heating the air in the chamber.

This heated air is then circulated throughout your house through the ducts by a fan. After it has released its heat into the air in your home, the liquid will cycle back into the ground to absorb more. This allows a geothermal heating system to provide you with a constant supply of warm air.

Unlike a furnace, which mixes in blasts of very hot air with periods of inactivity to try and keep your house at a constant temperature, a geothermal heat pump is able to provide a more consistent flow of air that is just the right temperature to keep your home comfortable. This means that these types of heat pumps are running just about all of the time as opposed to furnaces, but they are designed to work this way and the constant operation does not cause any excessive wear and tear.

Another great benefit of geothermal heat pumps is that they are able to keep your house cool in the summer as well. Just as the ground is warmer than the air in the winter, it is also cooler in the summer. That means that heat removed from your indoor air can be transferred to the ground in the same way that it was transferred in during the winter.

Tags: , , , ,
Posted in Geothermal | Comments Off

IAQ – Humidification/Dehumidification: A Tip From Anchorage

Friday, September 16th, 2011

Most people don’t think much about the humidity in their Anchorage home unless it gets unbearably high in the summer or extremely low in the winter. However, even slightly low or high humidity levels can have a huge impact on your indoor air quality, so even if you feel comfortable most of the time, a humidifier or dehumidifier is something you should look into. Many homes have humidity problems, and even if it’s not something you notice on a regular basis, air that’s too moist or too dry can have a large impact on your family’s health and the overall quality of your indoor air.

The Risks of High and Low Humidity

There are many reasons that proper humidity in your home is so important. For one thing, air that’s too humid promotes the growth of things like mold and dust mites that are significant airborne allergens. Without enough moisture, however, mold and dust mites can’t grow, so if you keep your indoor humidity below 50%, you’ll likely never need to worry about these allergens disrupting your family’s health or causing damage to your furniture.

But, dry air isn’t much better. Once the humidity level gets below 35%, a number of negative things can happen. Dry air enhances the symptoms of asthma, colds and allergies, and it causes damage to the wood fixtures and furnishings in your home. Even if it doesn’t do so much damage, dry air is simply uncomfortable, causing dried out skin, eyes, and hair.

Why Humidity Control Matters

Even if you have a state of the art air quality system installed in your home, humidity is very much something you need to be concerned about. Air that’s too moist or too dry can actually make it more difficult for indoor air cleaners and filters to get those contaminants out. In effect, poor humidity control makes every aspect of your air quality worse.

So if you want to be sure you’re getting the most possible out of your indoor air cleaner, the best thing you can do is put in a good humidification system as well. And when you’ve done that, you may even find that you can turn down the heat and air conditioning as well. Properly humidified air makes home heating and cooling more efficient, saving you both money on your monthly energy bill and wear and tear on your system. No matter how you look at it, proper humidity control is good for you and your home.

Tags: , , , , , ,
Posted in Indoor Air Quality | Comments Off