Posts Tagged ‘Energy Savings’

Tips to Make Your Louisville HVAC System More Efficient

Monday, May 7th, 2012

Considering the fact that up to half of the energy used in a home goes toward heating and cooling the interior space, it is smart to make sound decisions regarding the heating, ventilation, and air conditioning system.   Heating and cooling with your Louisville  HVAC system can become a comfortable investment when it is done efficiently.  Below are some tips to make your HVAC system more efficient.

 Regularly Maintain HVAC Equipment

Annual tune-ups of heating and cooling systems can easily improve HVAC system efficiency. Some of these steps include:

  • Ensure outdoor unit has proper ventilation, is free of debris or foliage growth, and is located in the shade
  • Check thermostat settings for comfort while home and to save energy while away
  • Tighten electrical connections and measure voltage and currents on motors
  • Lubricate all moving parts
  • Inspect and clean out the condensate drain on central air conditioning units
  • Check controls of the system for proper operation

Change Air Filters

Many air filters should be changed every three months, but some as often as every month.  Follow the manufacturer’s recommendation as well as simple common sense by checking the filters frequently during high-usage times and replacing as necessary.

Seal All Household Ducts

Heating and cooling ducts can be huge energy wasters if they are improperly sealed.  These ducts can be in an attic, basement, crawlspace, or garage, and can be easily repaired with duct sealant, or metal-backed tape along seams and connections.  As well, wrapping the ducts in insulation will keep them from overheating in the summer or freezing in the winter.

 Install a Programmable Thermostat

A programmable thermostat can control how hot or cold a home is every hour of every day within a week.  During the summer they can be set to higher settings while residents are away on vacation, and during winter they can be set to lower settings while residents are away at work or school.  This is a great way to save on energy costs throughout the year, as keeping a more consistent house temperature also helps the HVAC system to run more smoothly.

Install ENERGY STAR® Certified Equipment

When an HVAC system is more than ten years old, or if it no longer works properly it is probably time for a replacement.  Prior to replacing an entire HVAC system, it is prudent to check for air leaks in ducts, which can be a major cause for heating and cooling issues.  If it is determined that it is time for a professional to come in and install a new HVAC system, the savings in energy will be quite dramatic indeed.

Use any or all of the above tips will make your Louisville  HVAC system more efficient, while saving you money throughout the peak seasons of heating and cooling usage. Call AccuTemp Heating & Air Conditioning today if you need more information about any of these energy saving tips!

Tags: , , , , , ,
Posted in Air Conditioning, Heating | Comments Off

How Heating Zone Control Can Save You Money in Prospect

Monday, November 21st, 2011

The costs of heating your Prospect home have risen dramatically over the past couple of decades, thanks to higher energy costs and price increases for heating equipment. Despite the strides made in energy efficiency, there seems to be no end in sight for the steady rise in heating equipment operating costs.

Now add in the cost of heating unoccupied areas of your home, such as basements, hallways, or extra bedrooms, and the energy costs go even higher. Most of these costs are unnecessary and avoidable if you have the time and a small investment in a well-planned heating “strategy” for your home. This strategy involves using heating zone controls to make the most efficient use of your heating system.

In a nutshell, here is how heating zone control works. The rooms in your home are connected to your heating system by a series of ductwork, which carries heated and conditioned area to all corners. But some of these areas may not need to be heated as much – or possibly at all – compared to other rooms in your home. For example, do you need heat in your kitchen but not in your basement? Most people would answer yes. Or they may say they need more heat in the kitchen and some, but not very much heat in the basement.

Or try this: do most people in your house spend more time in one room, such as the family room, and less time in their bedrooms? If so, why would it be necessary to heat the bedrooms all of the time? In order to deliver heat to areas in your home that need it the most, the ductwork to these rooms should always be “open.” Ductwork to other unused areas of your home can be “closed” during various times of the day.

Opening and closing of ductwork and airflow is achieved by zone controls. A zone control is installed in the home which electronically or wirelessly opens and closes “dampers” in the ductwork, depending on the heating demand. You can divert heat to areas of your home using zone control and dampers while decreasing the heating load on your furnace. This type of heating zone control will move heated air to where you want it. Simply put, you are not heating areas of your home that don’t need the heat.

The heating zone controls can be programmed for various times of the day, too. For example, you may not need any heat in your basement while you sleep or when you are away from home. You can program the damper in your basement’s ductwork to remain closed or partially open during these times. In a sense, the heating zone control in your home acts like a programmable thermostat – only it uses a series of dampers to control indoor temperatures.

The next time you walk into an unused part of your home, think about how much money you are spending to heat it. It makes sense to consider heating zone controls. The initial costs of installing zone controls and dampers are minimal and the payback in energy savings and comfort are substantial.

Tags: , , , , , ,
Posted in Heating | Comments Off

How a Thermostat Works: Some Pointers from Floyds Knobs

Wednesday, October 12th, 2011

Your thermostat is designed to closely monitor and maintain the temperature in your Floyds Knobs home. When you flip the switch, you want your furnace or air conditioner to respond immediately. So, it’s a good idea to learn how it works so that if there is a problem, not only will you know better what needs to be fixed – you can decide whether to call a professional in for help.

Thermostats shouldn’t need input from you other than to set the initial temperature. From there, they are automatic switches. A thermometer inside the thermostat measures the indoor air temperature. When it gets above or below the limit you’ve specified, it triggers the thermostat to send a message to your home comfort system and keep things nice and comfortable.

Types of Thermostat

Thermostats come in two forms –electromechanical and electronic. An electromechanical thermostat is the simplest and has been used for decades to regulate temperature in homes. It has a simple strip or coil of metal that expands as the temperature rises and contract as it lowers. A mercury thermometer is placed on top of the strip. The coil’s movements cause the vial to tip as the temperature changes. There is a pair of electrical contacts on either end of the vial. The mercury can absorb that electrical current when the electrical contacts touch the thermometer. The mercury then acts as a switch to turn on your comfort system.

An electronic thermostat simply has an electronic sensor that measures the indoor air temperature. You set a temperature for your room and when it changes significantly, the switch inside your electronic thermostat is triggered, causing it to turn on your comfort system.

Ways to Upgrade Your Thermostat

Most homes only need the bare minimum in their thermostats. However, there is some very exciting technology on the market these days that can add quite a bit of value to your system. Not only can you install a programmable thermostat, you can opt for zone control systems that allow multiple thermostats in different rooms of your home.

Programming allows you to set temperatures for certain times of the day. This is especially great if you are gone from the house for long periods of time each day. Why heat or cool a home when it is empty? And if you have multiple people with different temperature needs, zone control temperature control allows you to set specific temperatures for specific rooms in your home – a very enticing option for large families or multi-story homes.

Tags: , , , , , ,
Posted in Heating | Comments Off

Turn that Thermostat Down a Degree and Save Money: Some Advice From Jeffersonville

Wednesday, September 14th, 2011

There are literally dozens of things you can do to cut back on your heating (and cooling) costs in your Jeffersonville home. These range from things like getting a high energy efficiency system to just making sure that you have adequate insulation in all parts of your house. But too many people overlook one of the simplest things that you can do to cut down on your monthly heating bill, and that is to turn the thermostat down.

Of course, you did not pay for that high tech home comfort system just so that you could walk around cold all winter long. You certainly want to keep your house at a temperature that is comfortable, but what does that really mean?

The normal default setting for a home heating system is usually somewhere between 72°F and 75°F. If you have your thermostat set somewhere in this range in the winter, you are probably quite comfortable indoors. In fact, you might not even need a sweater. But would you really notice if it was a degree or two cooler? Would it be incredibly inconvenient to put on a sweater or sweatshirt after all?

The truth is that most of us will be just as comfortable at 69°F as we are at 72°F, and the effect that small adjustment can have on your heating bill is actually pretty significant. In fact, you will save an average of 3% on your monthly bill for every degree you turn your thermostat down. Drop the temperature down by three or four degrees and that will give you up to a 10% monthly savings – hardly something to turn up your nose at.

And setting the regular temperature in your house a bit lower is not the only way your thermostat settings can save you money. You will also save quite a bit if you take the time to turn down the temperature when you leave the house and when you go to bed at night. There simply is no reason to pay to heat your house when you are not there and you will certainly be rewarded with a lower energy bill for your efforts.

Tags: , , , , ,
Posted in Energy Savings | Comments Off

How to Use AC Most Efficiently: A Guide From Buechel

Monday, September 5th, 2011

Air conditioning is definitely something most of us wouldn’t want to try and get through the summer in Buechel without. And for a lot of people, because of medical or other conditions, it’s an absolute necessity. But just because you need to run your AC unit all summer doesn’t mean you need to suffer under the weight of cooling costs.

So if you’re interested in ways to save on cooling without sacrificing comfort, here are a few tips to get you started:

  • Get a Programmable Thermostat – When you come home at the end of a long day, you want your home to be cool and comfortable. But if you only have a basic thermostat, you would have to leave your air conditioning on all day in order to make this possible. Paying to cool an empty house is probably the last thing you want to do. But what is the alternative? Programmable thermostats offer the best solution in a case like this. These devices can be easily integrated into just about any home air conditioning system and they allow you to set different temperatures for different times of the day. That means you can have your air conditioning off while you’re not home and set it to come on a half hour or so before you get there. This way, you get the pleasure of walking into a cool, comfortable house without paying extra to keep it that way when you’re not home.
  • Incorporate Passive Cooling – The design of your home and how you use it can also have an effect on how hard your air conditioning system needs to work. Taking steps as simple as closing the blinds to block out the afternoon sun, putting up awnings and making sure that the exterior of your home is painted a lighter color to reflect sunlight rather than a darker one that will absorb it are all excellent ways to reduce the load on your air conditioner.
  • Supplement Your System – You can also take a good chunk out of your cooling bills by using things like ceiling fans in conjunction with your air conditioner. A ceiling fan can effectively lower the indoor temperature several degrees on its own, allowing you to set your thermostat a little higher.

Air conditioning is a major expense that most of us are paying, but there’s no reason to pay more than necessary with so many strategies available to save money.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

What Is SEER? A Tip From Floyds Knobs

Friday, September 2nd, 2011

If you’ve been looking at air conditioners in Floyds Knobs, you’ve probably noticed that they all seem to have a SEER rating. But what does this actually mean?

The SEER, which stands for Seasonal Energy Efficiency Ratio, is a measure of how energy efficient a particular air conditioning model is. So when you’re shopping around for the best deal on an air conditioner for your home, this is something you’ll absolutely want to pay attention to.

Interpreting SEER Ratings

The SEER rating system is relatively simple – the higher the SEER, the more energy efficient the product. But because a higher price tag typically comes with a higher SEER rating, it’s important to know just how much more efficient a higher rated unit will be. It helps you decide whether paying significantly more for a higher rated unit is worth it in long term savings. Will it actually save you enough each month to make up for the difference in price?

Evaluating Your Energy Usage

A big factor here is how much you will use your air conditioner. If you live in a place with very hot and humid summers where the air conditioning runs constantly, you’re probably best off with the highest SEER you can find. When you consume that much energy to keep your home cool, you want to get as much as possible out of it, and that’s what a high SEER model can do for you.

On the other hand, if you live in an area that doesn’t have the harshest summers, you may be better off with a slightly less efficient (and therefore cheaper) model. Keep in mind, too, that the actual percentage increase in energy efficiency goes up by smaller and smaller increments the higher in SEER ratings you get. For instance, while a 10 SEER unit may be almost 20% more efficient than an 8 SEER model, a 12 SEER is only about 10% more efficient than that 10 SEER.

Finding the Right Balance

The best way to decide what SEER rating is best for you is to determine the annual cooling costs with your current unit and then calculate your savings in dollars based on the percentage each model would improve your efficiency. If you don’t currently have an air conditioner, this can be a bit tricky, but a professional contractor or air conditioning salesman can help you estimate your total monthly cooling costs with the various units.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off