Posts Tagged ‘Russell’

Norbourne Estates HVAC Question: What Happens if You Put Your Air Filter in the Wrong Way?

Wednesday, February 29th, 2012

Air filters are important pieces in your Norbourne Estates home’s comfort system. They keep unwanted debris and sediment out of your indoor air and they help your system run smoothly for years to come. However, if you’re not careful, an air filter put in backwards can lead to quite a few problems with your heating and cooling system.

The Most Common Problems

The most common problem you will face with a backwards facing filter is simple inefficiency. If your furnace is forced to blow air through the non-porous end of a filter, it will take more energy to do so. The blower will be overworked and you will pay more money for your heating. The same is doubly true for an air conditioner which has multiple filters in place to keep outdoor contaminants out of your indoor air.

Beyond the cost of improper filtering, you will likely suffer from a decrease in indoor air quality. The filter is designed to remove a lot of unwanted debris, but only when installed in a certain direction. If you set your filter up backwards, the normally collective end of the device will not face the air supply. In effect, your filter will help keep debris in the air.

This results in a clogged filter and improperly cleaned air when it reaches your lungs. If you have a home indoor air quality system it will help to supplement this problem for a while, but the clog will eventually become too much for your system.

Avoiding the Problem

There are two ways to avoid improper installation. First, you can have a professional install the system for you. Whenever you need a new filter ask someone to come and take care of it. When they do, though, pay close attention to how they set the filter and any other steps they take. By carefully watching you can ideally learn what it takes to do this step yourself and hopefully keep your system running smoothly for years to come.

If you have any questions about maintaining your heating and cooling system, give AccuTemp Heating & Air Conditioning a call!

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

What Happens If My Parkland Heat Pump Loses Power?

Wednesday, January 4th, 2012

One of the advantages of having a heat pump in your Parkland home is that they operate on electricity, so you don’t need to worry about having maintaining a supply of fuel to keep yours running. Where a furnace might call for you to purchase supplies of oil or natural gas, and a wood stove means keeping potentially messy firewood around, a heat pump runs cleanly on electricity.

Heat pumps are good at using electricity, too. They are often able to produce heat energy that can be as much as three times the electricity they draw to produce it. This means not just convenience, but also a big savings, just by virtue of using electrical power.

The risk there, of course, is that if and when the power goes out, so does the heat pump. That means when a big winter storm drops a tree on the local power line, things can get cold inside mighty quickly. For these situations, you should have a backup heating solution on hand to keep everyone comfortable in the short term. And, as a responsible homeowner, you likely already have this taken care of.

But what happens when the power comes back on? Can you just fire your heat pump right back up without missing a beat?

The short answer is “no.” You should not do that, for at least two reasons. First of all, after any power outage, you should always take care to turn on appliances gradually over a period of time rather than all at once in order to avoid a spike in demand at the power company, which can blow a grid. That’s just a general tip.

Specific to heat pumps, though, there is a unique concern. If the heat pump loses power for more than 30 minutes, the refrigerant can get too cold to flow properly, so turning it right back on can cause the whole thing to conk right out. Instead, do the following:

  1. Make sure the heat pump is off. You can do this during the power outage.
  2. Once power comes back on, turn the heat pump to the “Emergency Heat” setting. This will allow the compressor to warm up slowly and get the refrigerant warm enough to start flow freely again.
  3. Wait. The time you need to wait varies depending on the size and manufacturer of your heat pump, so refer to the manual. In general, you should wait at least 6 hours.

After this process, your heat pump should be ready to resume normal operation without issue. If it doesn’t, call your Parkland heating and cooling contractor.

Tags: , , , , ,
Posted in Heating | Comments Off

Essential Components of a Prospect Home Comfort System

Monday, December 19th, 2011

Indoor comfort is defined by several factors: temperature, humidity, and air quality. If any one of the three is out of the “normal” range it can affect the quality of life for in your Prospect home.

The ultimate goal of any heating & cooling contractor is to ensure that customers are comfortable – meaning that all three factors are addressed when servicing, replacing, or installing new equipment in a home. This equipment includes furnaces and air conditioners but also extends to humidifiers, dehumidifiers, ultraviolet (UV) lighting, etc.

Obviously, the essential component for most U.S. households is a furnace. Air conditioners may not be essential for all parts of the U.S., namely the northern states, but are still considered an integral part of any home comfort system. Add-ons like de-humidifiers and electronic filters are important for controlling the air quality.

Let’s look at the furnace first. There are several choices but most can be found in two different classifications: single-stage or variable speed two-stage. Your choice depends on the indoor square footage, your own comfort needs, and possibly the cost of energy units (gas or electric for example). Forced air is a common method of moving heated air to all parts of the home via an air handling unit and through a duct system. But gaining in popularity is radiant heat (electric), which does not utilize a duct system.

Air conditioners also come in a variety of sizes, including window/room air conditioners or central air conditioning, which is likely a “split” system including an outdoor unit and indoor coil. The size of the air conditioner is determined by square footage, which is part of a load calculation performed by qualified heating & cooling contractors while planning the equipment replacement or new installation. An oversized air conditioner may produce high humidity levels and an undersized unit may not provide enough cooling to all areas of the home. High humidity levels contribute to higher indoor temperatures in the summer, and can also lead to respiratory problems.

If someone in your home has allergies or is sensitive to certain pollutants in the air, it may be important to include extra filtration in your heating & cooling system, such as electronic filtration and UV lighting mounted in the buildings duct system, to kill germs and contaminants.

And speaking of an essential component, duct systems are keys to maximizing efficiency and comfort. Properly sized, insulated, and sealed, the duct system is a key to comfortable, healthy indoor air – and energy efficiency. It is also important to keep your duct system clean, too.

As always, it is best to consult with a qualified and licensed heating and cooling contractor who can offer the best solutions for your home comfort system.

Tags: , , , , , , ,
Posted in Air Conditioning, Heating, Indoor Air Quality | Comments Off

Crescent Hill Heating System Preventative Maintenance

Wednesday, December 14th, 2011

Ben Franklin once said, “An ounce of prevention is worth a pound of cure.” His famous quotation can apply to many things in life, including the heating system in your Crescent Hill home. While heating systems in Ben Franklin’s time consisted of wood burning stove and fireplaces requiring little maintenance, today’s sophisticated furnaces and building controls require a good dose of preventative maintenance in order to avoid mechanical failures and inefficient operation.

For example, a furnace runs better and lasts longer when you maintain a regular schedule of filter cleaning or replacing. A dirty or clogged filter can restrict airflow from the furnace into your home’s ventilation system and cause the furnace to work harder, putting more wear and tear on it and taking months, if not years, off of its useful life. If your furnace uses disposable filters, check them every month and replace them if necessary. If your furnace uses an electronic filter that requires cleaning, check it on a monthly or semi-monthly basis and clean it with soapy water and a hose. Be aware of the change of seasons which could add extra pollutants into the air like pollens, ragweed, and cottonwood. This debris easily finds its way into the filters and creates an unhealthy indoor environment.

You can also perform a simple visual inspection of working components inside your furnace by removing the access cover and checking – with a flashlight – for loose fan belts, frayed electrical wires, or a build-up of dirt and dust. Simple solutions include tightening or replacing belts, repairing wiring, and vacuuming out dirt and dust with a hose attachment. All of these actions will keep your furnace working better and prevent future failures.

You can also do a visual check of your home’s ventilation system, paying close attention to any cracks in duct seams or holes in flex ductwork. Using sealing cement or duct tape can usually fix these problems and allow for better, unrestricted air flow. Again, these actions will help your furnace work more efficiently and avoid premature failures.

Maybe the best advice for preventing heating system breakdowns is to have a regular maintenance schedule with a local qualified heating contractor. Most contractors can set you up with annual furnace and ventilation system inspections. Having a service agreement – as a rule – gives you priority emergency repairs and discounts on parts and services. Besides that, planned maintenance is also preventative maintenance, something that will give you peace of mind in the long run.

Tags: , , , ,
Posted in Heating | Comments Off

What Are Your Heat Pump Options in Russell?

Monday, December 5th, 2011

Once you’ve decided that a heat pump really is the best option for your Russell home, you’ll still have a lot of options to consider. There are actually quite a few types of heat pumps and they can vary considerably in terms of their energy efficiency and other available features.

For instance, you can choose to go with a heat pump with a one-speed, two-speed or multi-speed compressor. Single speed compressors are only capable of operating at full capacity. That means that they’ll certainly be able to keep your home warm, but they may be working harder than they need to at some points.

A two-speed or multi-speed compressor, on the other hand, can be adjusted to more appropriately fit the heating and cooling needs of the moment. There will certainly be times when you don’t need your heat pump to be going all out, and the ability to regulate this level of performance can benefit you in several ways.

It will allow you to maintain a more consistent indoor temperature to be sure, but it will also reduce the overall wear and tear on your heat pump over time. If your heat pump doesn’t have to run all out all of the time, it simply won’t wear out as fast, and that will save you both money and frustration in the long run. It’s also worth noting that heat pumps with two-speed or multi-speed compressors are more easily integrated into a zone control system if you have one in your home.

However, regardless of what type of compressor your heat pump has, you’ll also have to examine the various heat pump models available to determine what their actual energy efficiency ratings are. Each heat pump actually comes with two ratings, one for heating and one for cooling.

The heating season performance factor (HSPF) reflects the heat pump’s heating efficiency, while the seasonal energy efficiency ratio (SEER) is a measure of its cooling efficiency. The higher both of these numbers are, the higher the efficiency of the unit. But you don’t necessarily need both numbers to be as high as possible to get the best heat pump for your home.

If you’re going to be using the heat pump more for cooling than for heating because of the climate where you live, you’ll want to make sure the unit you get has as high a SEER as possible, but you won’t have to worry too much about the HSPF. But if you’re going to need more heating than cooling, you should pay more attention to the HSPF than the SEER.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Why Fall Maintenance is Important for Your Heating System: A Tip from Russell

Monday, November 7th, 2011

When it comes to heating equipment maintenance and repairs, it does not pay to procrastinate. The longer you put off the maintenance, the higher the probability that your heating system will break down or your Russell heating and cooling contractor will be unable to make an emergency repair when you need it. That’s why fall is the best time of the year to have maintenance and repair procedures performed.

Consider this: when do most people call a heating and cooling contractor? The answer: when they need a repair. The call could come in the middle of the night when a furnace stops working or during a family party on a weekend – both times when it is hard to find someone to do the repair work. Has this happened to you?

You can avoid this aggravation and extra expense by scheduling fall maintenance for your heating system. Fall is often the “slow season” for heating and cooling professionals and many schedule their routine service and maintenance appointments during this time. Contractors expect to be busy during the peak winter months and prefer to spread out the workload as evenly as possible.

Most heating and cooling contractors offer service or maintenance agreements, which lock in at least one or two visits a year for furnace or air conditioner inspection. It is rare to find a contractor who will schedule a furnace inspection during the cold winter months. They know that time is usually saved for people with real emergencies. If you don’t have a service agreement with a contractor, you may want to consider signing up for one and avoid the risk of waiting in line for a furnace repair in the dead of winter.

During fall maintenance, your heating equipment will be switched on and inspected. That may sound routine but by running your heating system early, you may be spared the expense of repairing your system when it fails to operate or run smoothly during the cold months. If there is a problem, it is better to fix it ahead of time.

There is no guarantee that a furnace that is tuned up in the fall will last throughout the winter without needing service. But a little preventive maintenance ahead of time will save a lot of heartache – and dollars – when a real emergency comes up.

Tags: , , , , ,
Posted in Heating | Comments Off

Most Commonly Asked Questions About Heat Pumps: A Guide from Portland

Monday, October 17th, 2011

If you’re thinking about buying a new heat pump for your Portland home, chances are you have some questions about these types of products and how they work. In fact, because these types of home comfort systems are relatively new to a lot of people, there are a quite a few misconceptions out there about how effective and efficient they can be.

Recently we’ve gotten some good questions from our readers, so we thought we’d like to pass along the answers so that others can benefit from the information as well.

If I Buy a Heat Pump, Do I Have to Buy an Air Conditioner Too?

That heat pumps are only able to heat your home is probably one of the biggest misconceptions about this type of equipment. Heat pumps work by extracting heat from the air in one place and transferring it to another. That means that in the winter, your heat pump is able to heat your home by taking heat from the outdoor air and moving it inside.

However, in the summer, the heat pump is able to do the same thing only in reverse. When you switch on your heat pump’s cooling function, it will be able to take the heat out of your indoor air and transfer it outside. In this way, the same heat pump system can keep your home warm in the winter and cool in the summer without you needing to purchase an air conditioner or other supplemental comfort systems.

If I Choose a Heat Pump System, Will I Also Need to Install Supplemental Heat?

That depends on what the climate is like where you live and how warm you like to keep your home. In general, heat pumps can keep any home comfortable as long as the outdoor temperature is above 32°F or so. If the temperature outside drops below that, you may want to have some type of supplemental heating system just in case. However, a heat pump will still be able to provide some warmth at these lower temperatures and you may be able to keep yourself comfortable with a simple space heater or two.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Allergens Affected by Indoor Air Quality Systems in Russell

Friday, October 14th, 2011

Indoor air quality devices are designed to capture and remove certain allergens from the air in your Russell, but what exactly is being removed and how would those allergens affect your health if left to circulate? Here is a quick rundown of common allergens found inside the average home and why you should have them removed:

  • Dust Mites – Dust mites develop in high humidity conditions – above 50%. This means that dehumidification to a healthy range between 35-50% will keep them from developing and ensure your indoor air stays comfortable and safe. Dust mites are not dangerous but they can severely increase complications from asthma and other uncomfortable conditions.
  • Animal Dander – Dander from cats, dogs, birds and other furry or feathered creatures is a common allergen for millions of people. If you suspect dander as an allergy, go on vacation to a place without dander and see how it affects you or your loved ones.
  • Dust and Dirt – Dust is in every home and while it is a common irritant, it can inflame asthma or worsen allergies many times over.
  • Pollen – Pollen is a problem for anyone with seasonal allergies or hay fever. While medicine can help, proper sealing of your house and indoor air filtration can reduce the presence of pollen from clothing and animals.
  • Mold Spores – Mold develops in high humidity and in ductwork where it is dark and sometimes damp. Proper filtration with a HEPA system and dehumidification will reduce this risk.
  • Bacteria and Viruses – Bacteria can develop in the air from common colds, old food or outside contaminants. Use a UV light to remove these from your air handler or ductwork.
  • Smoke and Exhaust – Indoor/outdoor ventilation can allow in smoke and exhaust that irritates most lungs. To avoid this problem install an electronic air cleaner that can target particles in smoke.

Getting rid of allergens in the air is an important aspect of maintaining a clean and healthy household. Proper air cleaning, filtration and UV purification will reduce these allergens many times over. There are also some great tips on the Asthma and Allergy Foundation website for how to reduce the presence of those allergens to start with.

Tags: , , , , , ,
Posted in Indoor Air Quality | Comments Off

How Efficient Is a Heat Pump? A Question From Clifton

Monday, September 26th, 2011

Heat pumps are actually remarkably efficient when compared to some of the home heating alternatives out there in Clifton. Especially if you’re already using electricity to heat your home, you can get generate huge savings on your monthly energy bills by switching to a heat pump system.

As their name suggests, heat pumps remove heat from the air and transfer that heat from one area to another. That means that in the winter, your heat pump will remove the heat from the air outside your home and pump that heat in to heat your home. During the summer months, that process is actually reversed, and heat pumps are able to cool your home by collecting the heat from your indoor air and pumping it outside.

Since heat pumps are actually just moving heat from one place to another rather than generating it all on their own, they don’t require much energy at all to operate. While you can buy furnaces that are as much as 97% energy efficient, they’re still using more energy than a heat pump would. The fact that the furnace is turning the vast majority of the energy that it uses into heat doesn’t mean that it still doesn’t require more energy to operate.

Just because heat pumps are more efficient than many other types of heating systems, you can’t just assume that all heat pumps are equally energy efficient. Just as different types and models of furnaces have different energy efficiency ratings, so too do the many types, sizes and models of heat pumps. Make sure you thoroughly compare your options before you settle on the right system for your home.

The energy efficiency rating of a furnace is easy to recognize, as each of them comes with a standard AFUE rating. If you’re looking to switch to heat pumps, however, it’s easy to get confused when you’re trying to compare the energy efficiency of various models.

Heat pumps actually have two separate measurements for energy efficiency. These are the seasonal energy efficiency ratio (SEER) and the heating seasonal performance factor (HSPF). Energy efficiency measurements for heat pumps reflect both the cooling and heating efficiency of the system, and so what’s best for you may vary depending on what you’re more likely to use your heat pump for.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

What Is New in Air Conditioning? A Question From Russell

Wednesday, August 31st, 2011

There are developments being made in air conditioning just about every day, and you can see the effects in Russell. This is a huge business, and so manufacturers are constantly trying to outdo each other as it is their only way to compete for customers. What this means for you as a consumer is that you will always have an excellent selection of products from which to choose.

Energy efficiency is one of the main selling points for any air conditioning system. For that reason, manufacturers are constantly working to come up with new and better models. The most advanced air conditioning systems on the market have energy efficiency ratings that by far surpass what was available even ten years ago and it is only going to keep getting better.

Another type of air conditioning system that is relatively new but is rapidly gaining in popularity is the ductless mini-split system. These and other compact air conditioners are popular because they can be installed virtually anywhere and do not take up much space. They also do not require the duct system that many other central air conditioners do.

In this way, ductless mini-splits combine the best of central air conditioning and more conventional window or wall mounted units. They keep individual rooms of your house cool and comfortable and can be controlled independently of one another, but they are also very quiet and energy efficient. In fact, ductless mini-splits are among some of the most energy efficient options available in the air conditioning world today.

For many years, enjoying the comfort that air conditioning provides has meant putting up with the noise of the compressor as well. Now, however, you can get the best of both worlds. Many air conditioning companies, in response to customer requests, have been working to curtail the noise and vibrations that air conditioners make.

This has affected models all up and down the line. Whether it is a window mounted unit you are after or a large central air conditioning system, you can rest assured that the model you buy today will be much quieter and produce a great deal fewer vibrations than your old system.

This is not only good news for you. It can also help to make your relationship with your neighbors a bit friendlier. The outside component of most air conditioning systems is usually where all the noise and vibrations come from anyway, and so your neighbors are likely to hear and feel it as well. If you have questions about which type of air conditioner is right for you, contact your local AC contractor.

Tags: , , ,
Posted in Air Conditioning | Comments Off